Functions That Can Be Assigned To User Defined Keys - Yamaha CL5 Reference Manual

Functions that can be assigned to USER DEFINED keys

FUNCTION PARAMETER 1 PARAMETER 2
NO ASSIGN - -
LATCH -
ALTERNATE
FUNCTION
UNLATCH -
group a OVERRIDE ON -
group a PRESET ON -
group b OVERRIDE ON -
AUTOMIXER
group b PRESET ON -
group c OVERRIDE ON -
group c PRESET ON -
BRIGHTNESS BANK CHANGE -
CH ON SPECIFIC CH *4)
INC
-
CH SELECT DEC
SPECIFIC CH *1)
OUTPUT -
CLEAR CUE -
SPECIFIC CH *2)
CUE MODE -
CUE
CUE INTERRUPTION -
FADER CUE RELEASE -
DANTE
INPUT DIRECT RECALL LIBRARY #000-#010
PATCH LIB
Description
No assignment.
Toggle ALTERNATE FUNCTION each time it is
pressed.
It goes OFF when the bank is switched.
Switch to ALTERNATE FUNCTION only while
pressed.
It goes OFF when the bank is switched.
Apply a fade-in to the channels in group a
where the override button is on, until the level
drops to 0 dB (the unity gain). Mute all
channels with the button turned off.
Switch the channels in group a to the mode
indicated by the mode button (man/auto/
mute) next to the lit preset indicator.
Apply a fade-in to the channels in group b
where the override button is on, until the level
drops to 0 dB (the unity gain). Mute all
channels with the button turned off.
Switch the channels in group b to the mode
indicated by the mode button (man/auto/
mute) next to the lit preset indicator.
Apply a fade-in to the channels in group c
where the override button is on, until the level
drops to 0 dB (the unity gain). Mute all
channels with the button turned off.
Switch the channels in group c to the mode
indicated by the mode button (man/auto/
mute) next to the lit preset indicator.
Toggle between the brightness settings stored
in A and B.
Switch the CH ON/OFF.
Increment or decrement the selected channel
number.
Select a channel from list 1).
Switch CUE on/off.
This clears the CUE.
CUE the channel selected from list 2).
This function switches the cue mode. In
Surround mode, it toggles between MIX, LAST,
and 5.1 SOLO with each press. When set to
MIX, the lamp is off. When set to LAST, the lamp
is on. When set to 5.1 SOLO, the lamp flashes.
Switches the CUE INTERRUPTION function on
or off.
Switches the FADER CUE RELEASE function on or
off.
Directly recalls the desired number of the
DANTE INPUT PATCH library. However, it does
not function during a scene recall.
199
FUNCTION PARAMETER 1 PARAMETER 2
LAST DCA SEL -
DCA1 -
DCA ROLL-
OUT
: -
DCA16 -
MASTER -
SENDS ON FADER -
CH 1-16 {CL5/CL3/CL1}
CH17-32 {CL5/CL3/CL1}
CH33-48 {CL5/CL3/CL1}
CH49-64 {CL5/CL3}
CH65-72 {CL5}
OVERVIEW ST IN
MIX1-16
MIX17-24
MATRIX
STEREO/MONO
DCA
A1 {CL5/CL3/CL1}
A2 {CL5/CL3}
Custom fader bank
A3 {CL3}
B1 {CL5/CL3/CL1}
EDITOR
B2 {CL3/CL1}
CONTROL
B3 {CL1}
B4 {CL1}
C1 {CL5}
Custom fader bank C2 {CL5}
C3 {CL5}
C4 {CL5}
C5 {CL5}
C6 {CL5}
SELECTED CHANNEL -
DYNAMICS LIBRARY
INPUT EQ LIBRARY
OUTPUT EQ LIBRARY
EFFECT LIBRARY
LIBRARY
GEQ LIBRARY
INPUT CH LIBRARY
OUTPUT EQ LIBRARY
PEQ LIBRARY
Setup
Description
This function rolls out or retracts the selected
DCA group.
Access the corresponding screen of CL Editor.
Reference Manual