Switching banks for USER DEFINED key settings
You can register the USER DEFINED key settings (12 keys for QL series consoles) to a
maximum of four banks.
Use the four BANK SELECT buttons on the left to select a bank.
You can press the CLEAR ALL button on the top right side to clear the content of the selected
bank.
Functions that can be assigned to USER DEFINED keys
FUNCTION
PARAMETER 1
NO ASSIGN
—
LATCH
ALTERNATE
FUNCTION
UNLATCH
group a OVERRIDE ON
group a PRESET ON
group b OVERRIDE ON
AUTOMIXER
group b PRESET ON
group c OVERRIDE ON
group c PRESET ON
BRIGHTNESS
BANK CHANGE
CH ON
SPECIFIC CH
INC
CH SELECT
DEC
SPECIFIC CH
OUTPUT
CLEAR CUE
SPECIFIC CH
CUE MODE
CUE
CUE INTERRUPTION
FADER CUE RELEASE
DANTE
INPUT
DIRECT RECALL
PATCH LIB
195
PARAMETER 2
Explanation
—
No assignment.
Toggle ALTERNATE FUNCTION each time it is
—
pressed. It goes OFF when the bank is switched.
Switch to ALTERNATE FUNCTION only while
—
pressed. It goes OFF when the bank is switched.
Apply a fade-in to the channels in group a where
the override button is on, until the level drops to
—
0 dB (the unity gain). Mute all channels with the
button turned off.
Switch the channels in group a to the mode
—
indicated by the mode button (man/auto/mute)
next to the lit preset indicator.
Apply a fade-in to the channels in group b
where the override button is on, until the level
—
drops to 0 dB (the unity gain). Mute all channels
with the button turned off.
Switch the channels in group b to the mode
—
indicated by the mode button (man/auto/mute)
next to the lit preset indicator.
Apply a fade-in to the channels in group c where
the override button is on, until the level drops to
—
0 dB (the unity gain). Mute all channels with the
button turned off.
Switch the channels in group c to the mode
—
indicated by the mode button (man/auto/mute)
next to the lit preset indicator.
Toggle between the brightness settings stored in
—
A and B.
*4)
Switch the CH ON/OFF.
Increment or decrement the selected channel
—
number.
*1)
Select a channel from list 1).
—
Switch CUE on/off.
—
This clears the CUE.
*2)
CUE the channel selected from list 2).
This function switches the cue mode. In
Surround mode, it toggles between MIX, LAST,
—
and 5.1 SOLO with each press. When set to
MIX, the lamp is off. When set to LAST, the lamp
is on. When set to 5.1 SOLO, the lamp flashes.
Switches the CUE INTERRUPTION function on or
—
off
Switches the FADER CUE RELEASE function on or
—
off.
Directly recalls the desired number of the
LIBRARY #000-#010
DANTE INPUT PATCH library. However, it does
not function during a scene recall.
Setup
Reference Manual