Error Messages - Yamaha DSP5D Owner's Manual

Error Messages

These are messages displayed as popup windows in the center of the screen. After noting the content of the message, click the
OK button in the screen to close the popup window.
Message
Cannot Store!
Cannot Recall!
Memory Card Full!
File Not Found!
Couldn't Read File.
Couldn't Write File.
Couldn't Delete File.
Couldn't Open File.
Couldn't Close File.
Unsupported File Format!
No Files to Upload!
Low Battery!
Power Supply has Malfunctioned!
Total Slot Power Capability Exceeded!
Internal Power Supply is Cut Off!
External Power Supply is Cut Off!
Illegal MAC Address! Cannot Use
Ethernet.
Power Supply Fan has Malfunctioned!
Right Fan has Malfunctioned!
Left Fan has Malfunctioned!
Failed to store a scene memory or library.
Failed to recall a scene memory or library.
You attempted to save a file that was larger than the available capacity of the memory card.
The file/directory does not exist on the memory card.
Failed to read the file from the memory card.
Failed to write the file to the memory card.
Failed to delete the memory card file.
Failed to open the file from the memory card.
Failed to close the file on the memory card.
The file you attempted to load from the memory card is of an unsupported format.
Internal memory does not contain files to upload.
The backup battery voltage is low.
A problem has occurred with the PW800W power supply connected to the PM5D. Please contact your
Yamaha dealer.
The I/O cards installed in the slots exceed the rated power capacity.
(DSP5D only) Power has stopped being supplied from the internal power supply. Alternatively, some
type of problem has occurred. If a problem has occurred, please contact your Yamaha dealer.
(DSP5D only) Power has stopped being supplied from the PW800W power supply connected to the
DSP5D. Alternatively, some type of problem has occurred. If a problem has occurred, please contact
your Yamaha dealer.
(DSP5D only) Because the MAC address setting was damaged for some reason, communication via the
NETWORK connector (RJ-45 connector) is not possible. Please contact your Yamaha dealer.
(DSP5D only) The cooling fan for the internal power supply has stopped. Please contact your Yamaha
dealer.
(DSP5D only) The cooling fan on the right side has malfunctioned. Please contact your Yamaha dealer.
(DSP5D only) The cooling fan on the left side has malfunctioned. Please contact your Yamaha dealer.
PM5D/PM5D-RH V2 / DSP5D Owner's Manual
Meaning
Reference section
379