Midi Ctrl Change (Midi Control Change) Screen - Yamaha DSP5D Owner's Manual

5 6
D List
In this list you can view and select the event (scene
recall / effect library recall) assigned to each program
number.
• CH/BANK (Channel/Bank)
Indicates the MIDI channel on which the program
change is transmitted/received. In Single mode when
the BANK ON/OFF button is on, this column is dis-
played as BANK, and the value shown corresponds to
the bank number.
• PGM No. (Program number)
Indicates the program number 1–128.
• LIBRARY NAME
Here you can view/select the type and the number of
the event (scene or effect) assigned to each channel/
program number.
To make an assignment, click the desired line to select
it. (That line will be highlighted in the center of the
list.) Click the button shown at the left of the
LIBRARY NAME field; the MIDI PGM CHANGE
SETUP window will appear. In this window you can
select the type of event (a scene, or a library item for
effect 1–8) and its number.
When a program change on the corresponding MIDI
channel is received, the event assigned to that program
number will be recalled. In addition, the correspond-
ing program change will be transmitted when this
event is recalled on the PM5D.
E PRESET
Clicking this button will restore all event assignments
in the list to their default state.
F CLEAR ALL
Clicking this button will delete all event assignments in
the list.
4
MIDI CTRL CHANGE (MIDI control
change) screen
Here you can select the PM5D parameter (fader operation,
[ON] key operation, etc.) assigned to each control number.
A MIDI SETUP
B CONTROL CHANGE SETUP
• NRPN
• TABLE [SINGLE]
• TABLE [MULTI]
PM5D/PM5D-RH V2 / DSP5D Owner's Manual
MIDI CTRL CHANGE
Select the ports that the PM5D will use to transmit and
receive MIDI messages, and the MIDI channels. This
item is linked with the settings in the MIDI SETUP
screen.
Here you can specify how control changes will be
transmitted and received, and turn transmission and
reception on/off. This item is linked with the settings in
the MIDI SETUP screen. You have the following
choices of transmission/reception method.
If this button is on, PM5D mix parameters will be
transmitted/received as NRPN messages.
If this button is on, PM5D mix parameters will be
transmitted/received as control change messages on a
single MIDI channel according to the assignments in
4 ).
the list (
If this button is on, PM5D mix parameters will be
transmitted/received as control change messages on
Reference section
1
2
3
191