Parameter Change - Yamaha DSP5D Owner's Manual

MIDI Data Format
[Recovery from bulk data to actual data]
d[0. 6]: actual data
b[0. 7]: bulk data
for( I=0; I<7; I++){
b[0] <<= 1;
d[I] = b[I+1]+(0x80&b[0]);
}
3.3 PARAMTER CHANGE
Reception
This message is echoed if [Parameter change ECHO] is ON.
This message is received if [Parameter change RX] is ON and [Rx CH] matches
the Device number included in the SUB STATUS. When a parameter change is
received, the specified parameter will be controlled. When a parameter request
is received, the current value of the specified parameter will be transmitted as a
parameter change with its Device Number as the [Rx CH].
Transmission
If [Parameter change TX] is ON, and you edit a parameter for which control
change transmission has not been enabled, a parameter change will be
transmitted with the [Tx CH] as its device number.
In response to a parameter request, a parameter change will be transmitted with
[Rx CH] as its device number.
Command
F0 43 1n 3E 0F ... F7
RARAMETER CHANGE
F0 43 3n 3E 0F ... F7
PARAMETER REQUEST
4. PARAMETER CHANGE details
4.1 Current Scene, Setup, Backup, Input Patch,
Output Patch, HA Data
– Parameter change –
4.1.1 Format
Reception
This message is received if [Parameter change RX] is ON and [Rx CH] matches
the Device number included in the SUB STATUS.
This message is echoed if [Parameter change ECHO] is ON.
When the message is received, the specified parameter will be edited.
Transmission
If [Parameter change Tx] is ON, this message is transmitted with the [Device
Number] specified by the [Tx CH] when you edit a parameter that is not
assigned in the [Control change assign table].
STATUS 11110000 F0
ID No. 01000011 43
SUB STATUS 0001nnnn 1n
GROUP ID 00111110 3E
MODEL ID 00001111 0F
DATA 0ccccccc cc
Category
DATA 0eeeeeee ee
0iiiiiii ii
0ccccccc cc
0ddddddd dd
: :
EOX 11110111 F7
*1 If ee is 0, the Element No. is extended by two bytes.
*2 If ii is 0, the Index No. is extended by two bytes.
*3 If cc is 0, the Channel No. is extended by two bytes.
4.1.2 Data categories
DATA CATEGORY
0x01 00000001
0x03 00000011
0x04 00000100
0x06 00000110
0x07 00000111
0x08 00001000
370
PM5D/PM5D-RH V2 / DSP5D Owner's Manual
rx/tx function
PM5D native parameter change
rx/tx
PM5D native parameter request
rx/tx
System exclusive message
Manufacture's ID number (YAMAHA)
n=0-15 (Device number=MIDI Channel)
Digital mixer
PM5D
Element No *1
Index No *2
Channel No *3
data
End of exclusive
NAME
Current Scene Data
Setup Data
Backup Data
Input patch Data
Output patch Data
HA Data
4.2 Current Scene, Setup, Backup, Input Patch,
Output Patch, HA Data
– Parameter request –
4.2.1 Format
Reception
This message is received if [Parameter change RX] is ON and [Rx CH] matches
the Device number included in the SUB STATUS.
This message is echoed if [Parameter change ECHO] is ON.
When this is received, the value of the specified parameter is transmitted as a

Parameter Change.

STATUS 11110000 F0
ID No. 01000011 43
SUB STATUS 0001nnnn 3n
GROUP ID 00111110 3E
MODEL ID 00001111 0F
DATA Category 0ccccccc cc
DATA 0eeeeeee ee
0iiiiiii ii
0ccccccc cc
EOX 11110111 F7
*1 See 4.1.1
4.2.2 Data categories
DATA CATEGORY
0x01 00000001
0x03 00000011
0x04 00000100
0x06 00000110
0x07 00000111
0x08 00001000
4.3 Function Call – Library Store/Recall –
(Parameter change)
4.3.1 Format
Reception
This message is received if [Parameter change RX] is ON and [Rx CH] matches
the Device number included in the SUB STATUS.
This message is echoed if [Parameter change ECHO] is ON.
When the message is received, the specified parameter will be edited.
Transmission
If [Parameter change Tx] is ON, this message is transmitted with a [Device
Number] of the [Tx CH].
STATUS 11110000 F0
ID No. 01000011 43
SUB STATUS 0001nnnn 1n
GROUP ID 00111110 3E
MODEL ID 00001111 0F
DATA CATEGORY 00000000 00
FUNCTION NAME 01001100 "L"
01101001 "i"
01100010 "b"
0fffffff ff
0fffffff ff
0fffffff ff
0fffffff ff
0fffffff ff
MODULE NAME 0mmmmmmm mm
0mmmmmmm mm
0mmmmmmm mm
0mmmmmmm mm
0mmmmmmm mm
0mmmmmmm mm
0mmmmmmm mm
0mmmmmmm mm
DATA 0mmmmmmm mh
0mmmmmmm ml
0ccccccc ch
0ccccccc cl
EOX 11110111 F7
Reference section
System exclusive message
Manufacture's ID number (YAMAHA)
n=0-15 (Device number=MIDI Channel)
Digital mixer
PM5D
Element No *1
Index No *1
Channel No *1
End of exclusive
NAME
Current Scene Data
Setup Data
Backup Data
Input patch Data
Output patch Data
HA Data
System exclusive message
Manufacture's ID number (YAMAHA)
n=0-15 (Device number=MIDI Channel)
Digital mixer
PM5D
OTHER DATA
(ASCII CODE) See 4.3.2
(ASCII CODE)
(ASCII CODE)
(ASCII CODE)
(ASCII CODE)
(ASCII CODE)
(ASCII CODE)
(ASCII CODE)
(ASCII CODE) See 4.3.3
(ASCII CODE)
(ASCII CODE)
(ASCII CODE)
(ASCII CODE)
(ASCII CODE)
(ASCII CODE)
(ASCII CODE)
number High
number Low
channel High
channel Low
End of exclusive