Yamaha DSP5D Owner's Manual page 64

6
Output channel operations
Signals sent from MIX channels and STE-
REO A/B channels to MATRIX buses
• If MATRIX channels are not paired
When you are holding down the [SEL] key of a spe-
cific MIX channel or STEREO A/B channel in order to
adjust the send levels from that channel to all MATRIX
buses, the MATRIX encoders will adjust the send level
to the corresponding MATRIX bus.
MATRIX 1
LEVEL
encoder
MIX CHANNEL
FADER
ON
• If MATRIX channels are paired
When you are holding down the [SEL] key of a spe-
cific MIX channel or STEREO A/B channel in order to
adjust the send levels from that channel to all MATRIX
buses, the MATRIX encoder of the odd-numbered
channel will adjust the pan of the signal sent to the two
MATRIX buses. The MATRIX encoder of the even-
numbered channel will adjust the send level shared by
the two MATRIX buses.
MATRIX 1/2
PAN encoder
MIX CHANNEL
to MATRIX 1/2
FADER
LEVEL
ON
Hint
For details on how to send the signal of a specific MIX chan-
nel to all MATRIX buses, refer to p.58. For details on how to
send the signal from either the STEREO A or B channel to all
MATRIX buses, refer to p.62.
64
PM5D/PM5D-RH V2 / DSP5D Owner's Manual
MATRIX 2
LEVEL
encoder
......
to MATRIX1
LEVEL ON
to MATRIX2
LEVEL
ON
MATRIX1/2
LEVEL
encoder
......
ON
PAN
ON
Output signals from MATRIX channels
• If MATRIX channels are not paired
The MATRIX encoders adjust the output level of the
corresponding MATRIX channel.
MATRIX chan-
nel 1 OUTPUT
LEVEL
encoder
MATRIX CHANNEL
OUTPUT LEVEL
MATRIX 1
OUTPUT LEVEL
MATRIX 2
• If MATRIX channels are paired
MIX encoders of odd-numbered channels adjust the
volume balance between paired MATRIX channels.
MATRIX encoders of even-numbered channels will
adjust the shared level of the two paired channels.
MATRIX
channel 1/2
BALANCE
encoder
MATRIX CHANNEL
OUTPUT LEVEL
MATRIX 1
MATRIX 2
Hint
You can access the MATRIX/ST ROUTING screen (MATRIX/
ST function) to see a list of the MATRIX channels in the dis-
play, and edit the pairing and other parameters. For details,
refer to p.262 of the Reference section.
Operating section
MATRIX chan-
nel 2 OUTPUT
LEVEL
encoder
ON
ON
MATRIX
channel 1/2
OUTPUT
LEVEL
encoder
BALANCE ON