Gpi Screen - Yamaha DSP5D Owner's Manual

MIDI REMOTE function

GPI screen

Here you can make settings for GPI (General Purpose
Interface) input/output, used to transfer control signals
between the PM5D and an external device.
3
1 2
A GPI IN port
These are the numbers of the GPI IN ports for which
you can make settings.
B GPI IN status
The yellow bar indicates the input signal voltage state
of the corresponding port. If the bar is not shown, the
signal is in the grounded state; if the bar is displayed to
the right edge, the signal is at the high level state. Use
3 ) field to select whether the signal is
the POLARITY (
active when low or high.
C POLARITY
This selects how GPI IN on/off will be detected. You
can choose Low Active (active when the key is
grounded) or High Active (active when key is open, or
when a high level signal is input).
D FUNCTION
E PARAMETER
These fields indicate the function that is executed when
the corresponding GPI IN port becomes active (or the
function that is controlled by the voltage value being
input from the GPI IN port), and option parameters
for that function.
To edit the settings, click the
open the GPI IN PORT ASSIGN window, and select
the function and parameter from the following table.
194
PM5D/PM5D-RH V2 / DSP5D Owner's Manual
GPI
4 5
button at the left to
FUNCTION PARAMETER
NO ASSIGN
DIMMER ON
SOURCE=
MONITOR [monitor source
name]
MONO ON
LATCH
TALKBACK
ON
UNLATCH
CH ON-
[channel name]
LATCH
CH ON-
[channel name]
UNLATCH
FADER
[channel name]
LEVEL
FRONT-REAR
PAN [SEL]
LEFT-RIGHT
PAN [SEL]
FRONT-REAR
PAN [ODD]
SUR-
LEFT-RIGHT
ROUND PAN
PAN [ODD]
FRONT-REAR
PAN [EVEN]
LEFT-RIGHT
PAN [EVEN]
USER
[User Defined
DEFINED
key bank / key
KEY FUNC-
number]
TION
USER [User Defined
DEFINED key bank / key
KEY LED number]
PEAK HOLD
ON
OSCILLA-
TOR ON
SOLO ON
Reference section
PM5D operation
— No assignment
Switches the Dimmer
function on/off
Switches the monitor
source
Switches the monitor sec-
tion [MONO] key on
Switches the Talkback
function on/off (latched
operation)
Switches the Talkback
function on/off (unlatched
operation)
Switches the channel on/
off (latched operation)
Switches the channel on/
off (unlatched operation)
Modifies the fader value
(LEVEL parameter)
according to the voltage
according to the voltage.
Modifies the surround pan-
ning (left/right) of the
selected channel accord-
ing to the voltage.
Modifies the surround pan-
ning (front/rear) of the
selected odd-numbered
channel according to the
voltage.
Modifies the surround pan-
ning (left/right) of the
selected odd-numbered
channel according to the
voltage.
Modifies the surround pan-
ning (front/rear) of the
selected even-numbered
channel according to the
voltage.
Modifies the surround pan-
ning (left/right) of the
selected even-numbered
channel according to the
voltage.
While the external input is
active, executes the same
operation as when the
selected User Defined key
is pressed
While the external input is
active, lights the LED of
the selected User Defined
key
Switches the Peak Hold
function on/off
Switches the Oscillator on/
—
off
Switches the Solo func-
tion on/off