Yamaha DSP5D Owner's Manual page 216

UTILITY function
F LOAD
This button loads the data selected in the left side of the
screen into the parameters you specify. When you click
this button, a message will ask you to confirm the Load
operation. (This is common to all modes.)
Note
If cascade connection is enabled, you can't execute the load
operation.
❏ ADVANCED mode
In this mode you can select either scene memory or a
library, specify a starting number and ending number, and
load the specified range of data from the card.
7
8
9
G CATEGORY
This indicates the type of data (scene memory or
library) saved in the currently selected file.
H SOURCE (load-source)
This area shows the starting and ending number (and
the corresponding scene names or library titles) of the
scene memories or library items that will be loaded
from the card. Click the
right of each box to change the number.
I DESTINATION (load-destination)
If you've changed the starting number of the load-des-
tination, this area shows the starting and ending
number (and the corresponding scene names or library
titles) of the PM5D's internal scene memories or
library items into which the data selected in the
SOURCE area will be loaded. To edit the setting, click
the / buttons located at the left and right of the
starting number box. (The ending number value will
change automatically as you edit the starting number.)
Memory card
Starting
number
002 BBB
003 CCC
➠
004 DDD
005 EEE
Ending
006 FFF
number
216
PM5D/PM5D-RH V2 / DSP5D Owner's Manual
ADVANCED button
/ buttons at the left and
PM5D
011 BBB
012 CCC
013 DDD
014 EEE
Hint
• Even if you've selected data that was saved in BASIC mode,
you can switch to ADVANCED mode and load only specific
numbers.
• However, an exception is that if the selected data was saved
as ALL DATA or SCENE MEMORY+LINKED LIBRARY in
BASIC mode, the ADVANCED button will be grayed-out,
and you will not be able to switch to ADVANCED mode.
Note
You cannot load from a memory card if LOAD LOCK is turned
on in the UTILITY function SECURITY screen.
❏ CSV IMPORT mode
If a CSV file or directory is selected, CSV IMPORT
mode will be selected automatically. The selected CSV
file (or CSV files in the selected directory) will be
searched, and the following items will appear in the
right of the screen.
Note
If a DSP5D (machine #2 or #3) is selected as the target of
control, CSV files can't be loaded. If you need to load a CSV
file, please use DSP5D Editor.
J
J LIBRARY TITLE
K CHANNEL NAME
Use these buttons to select the data you want to load
(e.g., library titles or channel names). (The contents of
each item are the same as in the SAVE screen.)
However, you will only be able to select items that
match the CSV file (or the CSV files in the directory)
selected in the list for loading. The buttons for other
items will be grayed-out and unavailable.
L SET ALL
This button selects all available items for loading.
M CLEAR ALL
De-selects all items.
Note
Note that the screen will automatically switch to CSV IMPORT
mode even if the directory selected in the list does not contain
an appropriate CSV file. (In this case, all buttons will be
grayed-out.)
Reference section
K
L
M