Output Ch Library Screen - Yamaha DSP5D Owner's Manual

F CH SELECT (Channel selection)
Here you can select the paste-destination channel(s).
You can only select channels of the same type as the
copy-source.
Hint
If the copy-source MIX/MATRIX channel is paired, the odd-
numbered channel is copied to the odd-numbered channel(s),
and the even-numbered channel is copied to the even-num-
bered channel(s).
G SET ALL
Specifies the paste-destination as all channels of the
same type as the copy-source.
H CLEAR ALL
De-selects all channels.

OUTPUT CH LIBRARY screen

Here you can recall, store, rename, or delete items in the
output channel library.
1
2
3
A EDIT
When you click this button, the CH VIEW screen
(OUTPUT CH VIEW screen) for the currently selected
output channel will appear.
B Channel
This is the number and name of the channel you will
store or recall.
Note
• Channel library store/recall operations are performed in units
• If the channel selected by the [SEL] key is paired (or if a
• When you recall a channel library item into one of a pair of
C LIBRARY TYPE (Channel type)
Indicates the type of the currently selected channel. If a
MIX or STEREO A/B channel is selected, the pairing
configuration of MATRIX buses 1–8 is shown immedi-
ately below.
PM5D/PM5D-RH V2 / DSP5D Owner's Manual
OUTPUT CH LIBRARY
of one channel.
STEREO A/B channel is selected), the operation will apply
to only one of the currently selected channels (in the case of
STEREO A/B, only the L or the R channel).
MIX/MATRIX channels (or into L or R of the STEREO A/B
channel), any linked parameters will be copied to the other
channel.
Reference section
275