Monitor Screen - Yamaha DSP5D Owner's Manual

MON/CUE function
5
6
E Output level meter
Indicates the output level of 2TR OUT DIGITAL jacks
1–3.
F SRC (Sampling Rate Converter)
These are on/off and output frequency select switches
for the sampling rate converters built into 2TR OUT
DIGITAL jacks 1–3. As the output frequency you can
select either 44.1 kHz or 48 kHz. The on/off button
selects either ON or THROUGH (off).
G Fs (Sampling frequency)
This indicates the sampling frequency at which the
PM5D is operating.
238
PM5D/PM5D-RH V2 / DSP5D Owner's Manual

MONITOR screen

Here you can make settings and perform operations
related to monitoring.
MONITOR
7
A MONITOR SOURCE
Selects the source that will be monitored from the L/R/
C MONITOR OUT jacks. You can select one from 2TR
IN A1/A2, 2TR IN D1–D3, or DEFINE, and also simul-
taneously select one from STEREO A/B or LCR. These
buttons are linked with the various keys of the MONI-
TOR section in the top panel.
2TR IN A1
2TR IN A2
2TR IN D1
2TR IN D2
2TR IN D3
STEREO A
STEREO B
LCR
DEFINE
If a monitor source indicated by (*) is selected, the sig-
nal that is output will change depending on whether
Reference section
1
2
2TR IN ANALOG jack 1 input signal
2TR IN ANALOG jack 2 input signal
2TR IN DIGITAL jack 1 input signal
2TR IN DIGITAL jack 2 input signal
2TR IN DIGITAL jack 3 input signal
STEREO A channel output signal (*)
STEREO B channel output signal (*)
LCR channel output signal (*)
The signal selected in the DEFINE section
2
( ) of this screen