Cascade Screen - Yamaha DSP5D Owner's Manual

SYS/W.CLOCK function
In this state, the SLAVE unit will follow when you
operate the MASTER unit. The same mix will be out-
put from both PM5D units.
If you daisy-chain two to four PM5D units (i.e., con-
nect the first unit's CASCADE OUT → second unit's
CASCADE IN, and the second unit's CASCADE OUT
→ third unit's CASCADE IN. Up to four units can be
connected.), set the PM5D located last in the chain to
MASTER, and the remaining PM5D units to SLAVE.
Turn the BI-DIRECTION button Off for all units.
CASCADE CASCADE
IN OUT
PM5D A
(Cascade slave)
CASCADE MODE= SLAVE
BI-DIRECTION= OFF
CASCADE CASCADE
IN OUT
PM5D B
(Cascade slave)
CASCADE MODE= SLAVE
BI-DIRECTION= OFF
CASCADE CASCADE
IN OUT
PM5D C
(Cascade slave)
CASCADE MODE= SLAVE
BI-DIRECTION= OFF
CASCADE CASCADE
IN OUT
PM5D D
(Cascade master)
CASCADE MODE= MASTER
BI-DIRECTION= OFF
In this state, the SLAVE units will follow when you
operate the MASTER unit. The final mix of all signals
will be output from the PM5D that is connected last in
the chain.
226
PM5D/PM5D-RH V2 / DSP5D Owner's Manual
Audio signals of A
Audio signals of
A+B
Audio signals of
A+B+C
Audio signals of
A+B+C+D
Reference section

CASCADE screen

Here you can make various settings related to cascade
connection.
CASCADE
1
2
A CASCADE ENABLED/DISABLED
Enables/disables cascade connection.
B CASCADE LINK
Here you can select the operations and parameters that
will be linked when multiple PM5D units are cascade-
connected. You can select the following items.
• SCENE RECALL
Scene recall operations / Recall undo operations
• SCENE STORE/EDIT
Scene store operations, store undo operations, title
editing, sorting
• CUE/SOLO LOGIC
Cue/Solo operations (however, all Cue settings are
cleared when linking occurs)
• DIMMER ON/OFF
Dimmer effect (including talkback dimmer)
• PAGE CHANGE
Switching the display screen