Comp Link Assign (Compressor Link Assign) Screen; Pan/Routing Function; Ch To Mix (Channel To Mix) Screen - Yamaha DSP5D Owner's Manual

COMP LINK ASSIGN (Compressor link
assign) screen
Here you can specify the input channels that will be
assigned to compressor link groups 1–8. Compressor
parameters are linked for channels belonging to the same
group.
COMP LINK ASSIGN
Except for the fact that these settings apply to input chan-
nels, the display and operations are the same as in the
OUTPUT DCA/GROUP function COMP LINK ASSIGN
screen. Refer to p.261.
Hint
Input channels and output channels use separate compres-
sor link groups. Input channels use groups A–H, and output
channels use groups 1–8.

PAN/ROUTING function

CH to MIX (Channel to mix) screen

Here you can send signals from input channels to the
desired MIX bus. In this screen you can also switch the
type (VARI or FIXED) of each MIX bus, and specify the
location from which the signal will be sent.
CH to MIX
1
A Type selection
Here you can select the mix bus type for every two
adjacent odd-numbered/even-numbered MIX buses.
You can choose one of the following types.
• FIXED
The send level of the MIX bus is fixed at nominal level
(0.0 dB). Choose this if you want to use the MIX bus as
a group output or as a bus output for recording on a
multitrack recorder.
• VARI (Variable)
The send level of the MIX bus is adjustable. Choose
this if you want to use the MIX bus as an external effect
send or as a foldback output.
Hint
If surround mode is enabled, the type indication will change to
"SURROUND" for MIX buses used as surround buses. You
cannot change the mix bus type during this time.
B MIX bus
This is the number and name of the MIX bus to which
the signal is sent. Paired MIX buses are indicated by a
heart symbol displayed between them. You can click
this symbol to enable/disable pairing.
C POST ON/POST TO ST (Post on / Post to
stereo)
This button lets you specify in greater detail the loca-
tion from which post-fader signals will be sent from
input channels to this MIX bus. You can choose one of
the following two send locations.
PM5D/PM5D-RH V2 / DSP5D Owner's Manual
2
3 4
Reference section
299