Name Screen - Yamaha DSP5D Owner's Manual

Digital mixing console/digital mixing system
Hide thumbs Also See for DSP5D:
Table of Contents

Advertisement

INPUT PATCH function
7
9
J
G DIRECT OUT ON/OFF
These buttons switch direct output on/off for each
channel.
H DIRECT OUT
Here you can select one of the following as the direct
output location for each channel.
PRE ATT
Immediately before the attenuator
PRE HPF
Immediately before the high-pass filter
Immediately before the EQ (immediately
PRE EQ
after the PRE EQ of the INSERT I/O)
PRE FADER
Immediately before the fader
POST ON
Immediately after the CH [ON] key
I SET ALL
Turns on the corresponding item (direct out or the
direct out point) for all channels (including channels
not currently shown in the screen).
J CLEAR ALL
Turns direct out off for all channels (including chan-
nels not currently shown in the screen).
282
PM5D/PM5D-RH V2 / DSP5D Owner's Manual
8
Reference section

NAME screen

Here you can assign a name to each input channel and
DCA group.
1
2
A Channel
This area indicates the input channel (input channel,
ST IN channel) and DCA group numbers.
B Name
This area indicates the names currently assigned to
each input channel and DCA group. If you click the
name, a window will open allowing you to assign a
name to the channel.
C LIBRARY
This button accesses the INPUT PATCH LIBRARY
screen (➥ p.283), where you can store/recall input
channel patch (and name) library settings.
NAME
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pm5d-rh v2Pm5dPm5d-rhPm5d v2Pm5d-ex

Table of Contents