Wavetronix SmartSensor Advance User Manual page 69

Note. You can copy
and paste alert and
zone settings by
right-clicking on alert
and zone tabs.
SmartSensor Advance User Guide
68
•
Setting
Speed (mph)
ETA (seconds)
Copying and pasting channel settings
Figure 65. Copying channel settings
Right-click on a channel tab and select Copy Channel.
1
Right-click on another channel tab and select Paste Channel.
2
Description
Lets you set the
speed thresholds that
will trigger the zone
output.
Lets you set the
ETA thresholds that
will trigger the zone
output.
Details
Click inside the
Speed field and use
the up/down arrows
to change the speed
filter.
The zone output will
only be triggered if
a vehicle's speed
is within the speed
thresholds.
Click inside the ETA
field and use the
up/down arrows to
change the ETA filter.
The zone output will
only be triggered if a
vehicle's ETA to the
stop bar is within the
ETA thresholds.