Changing Communication Tab Settings - Wavetronix SmartSensor Advance User Manual

SmartSensor Advance User Guide
44
•
Setting
RF Channel
Units
Source

Changing Communication tab settings

Description
Lets you change
the radio frequency
channel the sensor is
transmitting on.
Sets whether the
software displays
distances in
standard (mph/feet) or
metric (kph/meters).
Lets you choose
where the SSMA
gets the traffic data it
reports.
Figure 46. Communication tab
Details
If you're using
multiple sensors in
the same intersection,
set each to a unique
RF channel.
Purely for your
convenience—does
not affect sensor
performance.
Choose Antenna for
standard use (reports
data as detected by
the sensor). Choose
Diagnostic for testing
and training (creates
simulated traffic).