Wavetronix SmartSensor Advance User Manual page 42

If the version of SSMA doesn't match the version of the sensor's
1
embedded firmware, then after you click Connect, the Version
Control screen will appear.
If you would like specifics on the mismatch, click the Details >>
2
button.
Click Install Upgrade, or, if you prefer not to update at this time,
3
click Close.
Downgrading the sensor
Figure 43. Downgrade warning message
If the downgrade message appears, it means that the sensor firm-
ware is newer than the version of SSMA you're using. Click Cancel,
and then get the newest version of SSMA from www.wavetronix.com.
Chapter 4: Connecting to the Sensor
41
•