Editing Thresholds For Specific Bins - Wavetronix SmartSensor Advance User Manual

Click the PGA button.
1
Raise or lower the PGA and click OK.
2

Editing thresholds for specific bins

Click and drag over the ranges that need to be adjusted.
1
Click the pencil button and the Edit Sensitivity Thresholds
2
window will appear.
Click and drag again to select the exact bins to adjust.
3
Make sensitivity adjustments using the controls on the right. You
4
can add/subtract a specified value, set the sensitivity level to be
a certain percentage of the existing value, or specify an exact
value.
Click Enter to confirm. If desired, repeat with other bins.
5
Click OK.
6
Re-evaluate the traffic on the road with the trackers in the
7
software.
Figure 54. Editing specific bins
Note. Negative
values will increase
sensitivity; positive
values will decrease
sensitivity.
Chapter 6: Sensor Configuration
51
•