Network Settings - NovaStar NovaPro UHD Jr User Manual

NovaPro UHD Jr All-in-One Controller
User Manual
Figure 5-26 Communication mode



5.11.2 Network Settings

The network setting modes include Manual and Auto.



Figure 5-27 Network settings
Note:
1. When communicating with the control PC, the device and control PC must be on
2. The IP address of current device cannot conflict with IP addresses of other
www.novastar.tech
When USB Preferred is selected, the device communicates with the PC via USB
port by preference.
When LAN Preferred is selected, the device communicates with the PC via
Ethernet port by preference.
Manual: Set the device IP address and subnet mask manually.
Auto: The device reads the network parameters automatically.
Reset: Reset the parameters to defaults.
the same LAN.
devices.
5 Menu Operations
29