Communication Settings; Communication Mode; Network Settings; Langugage - NovaStar NovaPro UHD User Manual

4.10 Communication Settings

4.10.1 Communication Mode

Figure 4-34 Communication mode
The device is connected to the PC via USB port and Ethernet port. The options are USB Preferred and LAN
Preferred.
When USB Preferred is selected, the device communicates with the PC via USB port.

When LAN Preferred is selected, the device communicates with the PC via Ethernet port.


4.10.2 Network Settings

The options are Manual and Auto.
Manual: Set the device IP address, subnet mask and gateway manually.

Auto: The device reads the network parameters automatically.

Reset: Reset all the settings to defaults.

Figure 4-35 Network settings
Note:
1. When communicating with the control PC, the device and control PC must be on the same LAN.
2. The IP address of current device cannot conflict with IP addresses of other devices.

4.11 Langugage

The NovaPro UHD supports both Chinese and English. You can freely switch to either language.
www.novastar.tech
NovaPro UHD All-in-One Controller User Manual
23