Adding Layers - NovaStar NovaPro UHD User Manual

a. Click + in BKG area to enter the BKG settings page.
b. Click Image or Capture to add local files or capture an input source image as the BKG files.
c. Click to add a new BKG file.
d. Click Apply to save the newly-added BKG files to the software library.
Applying BKG files

Select the desired BKG file and click the file to add it to PVW.

6.3.4 Adding Layers

Step 1
Click to select a signal source on the left.
Right click the edit icon on the right of the signal source to rename the signal source.
Step 2
In the video editing area, click and drag the mouse to create a custom-sized layer.
You can also select a signal source and drag it to the video editing area, and then release the mouse to create
a layer.
When you move the mouse to any edge of the layer and a double-headed arrow appears,

you can click and drag the layer edge to adjust the layer size.
When you move the mouse to the layer area, you can click and drag the layer to change its

position.
When a single layer is selected, you can press the arrow buttons to fine tune the layer

position, while hold down the Shift key and press the arrow buttons to fine tune the layer
size.
When you move the mouse to the layer top, five buttons appear in the top right corner of

the layer. The detailed button functions are shown in
Table 6-5
Layer buttons
Icon Description
Fill the layer to the screen loaded by the current connector.
Fill the layer to the whole output screen.
Close the layer.
Enable the pixel-to-pixel display mode.
Unlock the layer.
Lock the layer.
You can right click the layer to perform the following operations:
Switch Source: Change the signal source of the layer.

Bring to Front: Bring the layer to the front.

Send to Back: Send the layer to the back.

Bring Forward / Send Backward: Move the layer forward or backward.

Lock Layer / Unlock Layer: Lock or unlock the layer.
Close Current Layer: Close the selected layer.

Close All Layers: Close all the layers.

Setting layer properties
Configure the layer properties in the property setting area on the right where you can configure the layer
layout, color and other advanced properties.
www.novastar.tech
NovaPro UHD All-in-One Controller User Manual
Table 6-5.
40