Quick Configuration; Advanced Configuration - NovaStar MCTRL660 PRO User Manual

Independent controller
Hide thumbs Also See for MCTRL660 PRO:
Table of Contents

Advertisement

Brightness Adjustment
This function allows you to adjust the LED screen brightness in an eye-friendly way according to the current
ambient brightness. Besides, appropriate screen brightness can extend the service life of the LED screen.
Figure 6-6 Brightness adjustment
Step 1 On the home screen, press the knob to enter the main menu screen.
Step 2 Select Brightness and press the knob to confirm the selection.
Step 3 Rotate the knob to adjust the brightness value. You can see the adjustment result on the LED screen in real
time. Press the knob to apply the brightness you set when you are satisfied with it.
Screen Settings
Configure the LED screen to ensure the screen can display the entire input source normally.
Screen configuration methods include quick, advanced and automatic configurations.
Constraints:
The three methods cannot be enabled at the same time.
After the screen is configured in NovaLCT, do not use any of the methods on the MCTRL660 PRO to configure
the screen again.

6.3.1 Quick Configuration

Configure the whole LED screen uniformly and quickly. See

6.3.2 Advanced Configuration

Set parameters for each Ethernet port, including number of cabinet rows and columns (Cabinet Row Qty and
Cabinet Column Qty), horizontal offset (Start X), vertical offset (Start Y), and data flow.
Figure 6-7 Advanced configuration
Step 1 On the home screen, press the knob to enter the main menu.
Step 2 Choose Screen Settings > Advanced Config to enter its submenu.
Step 3 Enable Advanced Config, select an Ethernet port, set the parameters for it, and apply the settings.
Step 4 Select the next Ethernet port to continue setting until all the Ethernet ports are set.
www.novastar.tech
MCTRL660 PRO Independent Controller User Manual
6.1
Quick Screen
Configuration.
14

Advertisement

Table of Contents
loading

Table of Contents