Input Source Resolution; Input Color - NovaStar NovaPro UHD User Manual

Note:
When DP is selected as the input source and the DP source is output by the VIO 4K from ANALOG WAY, you
must hold down ESC on the NovaPro UHD to enter the Parameter Settings screen and turn on SWING
Configuration.

4.5.3 Input Source Resolution

You can adjust the resolution and frame rate of the input source through the following two ways.
Standard resolution

Custom resolution

Figure 4-23 Setting input source resolution
Note:
SDI input source does not support resolution settings.
Standard Resolution
You can select a standard resolution and frame rate. Then rotate the knob to select Apply and press the knob
to make the settings take effect. If you do not press the knob, the settings will not take effect.
Figure 4-24 Standard resolution
Custom Resolution
You can set a custom width, height and frame rate. The stepping of the knob rotation is 4. Then rotate the
knob to select Apply and press the knob to make the settings take effect. If you do not press the knob, the
settings will not take effect.
Figure 4-25 Custom resolution

4.5.4 Input Color

Adjust the parameters of the input source image.
www.novastar.tech
NovaPro UHD All-in-One Controller User Manual
15