Sony MVS-8000 User Manual page 377

1
2
3
4
5
For details of parameters, see step 3 of "Key control block (MKS-8035 Key
Control Module, option) operations for key shrinking, magnification and
movement" (page 374).
Entering parameters
This operation is the same as DME three-dimensional parameter input.
For details, see "Entering Three-Dimensional Parameter Values" in Chapter
11 (Volume 2).
Resetting parameters
This operation is the same as DME three-dimensional parameter resetting.
For details, see "Entering Three-Dimensional Parameter Values" in Chapter
11 (Volume 2).
Clearing resizer effects
To clear two-dimensional transform parameters only and set the
initial state
In the device control block, press the [CLR WORK BUFR] button in the
operation buttons.
To clear all resizer parameters, and set the initial state
In the device control block, press the [CLR WORK BUFR] button in the
operation buttons, twice in rapid succession.
376
Resizer
Press the [RSZR CTRL] button, turning it on.
Press the delegation button to select the key.
Press the [RSZR] button, turning it on.
• To change the aspect ratio, turn on the [LOC SIZE(ASP)].
• To shrink, magnify, or move the key , turn on the [LOC XYZ(LOC)].
Hold these buttons down while carrying out the operation of step 5 to
enable fine adjustment (fine mode).
Use the trackball for the operation.
For details of parameters, see step 3 of "Key control block (MKS-8035
Key Control Module, option) operations for key shrinking, magnification
and movement" (page 374).