Setting Wipe Modifiers - Sony MVS-8000 User Manual

2

Setting Wipe Modifiers

You can apply various modifiers to the wipe pattern: setting the wipe direction,
pattern position, and so on.
For an overview of the wipe modifiers, see "Wipe Pattern Variation and
Modifiers" (page 59).
Note that the available modifiers may depend on the pattern you are using. For
details, see "Possible combinations of wipe patterns and modifiers" (page
404).
Main pattern and sub pattern modifiers
You can make independent settings of the modifiers for the main pattern and
sub pattern.
• To set the modifiers for the main pattern, in the M/E-1 >Wipe menu, select
• To set the modifiers for the sub pattern, select HF6 'Sub Modify,' and make
Operations in the Main Modify menu and Sub Modify menu are the same.
Independently set modifiers for the main pattern and sub pattern
• Positioner
• Rotation
• Aspect ratio
• Pattern replication (MULTI)
• Pairing
394
Basic Procedure for Wipe Settings
Set the following parameters as required.
Knob Parameter
1 Mix Ratio
2 H Size
3 V Size
4 Flash Rate
You can also apply the dust mix function to the pattern generated by a
pattern mix.
Note
When a random/diamond dust wipe (pattern numbers 270-274) is selected,
the dust mix function is not available.
HF5 'Main Modify,' and make the settings in the Main Modify menu.
the settings in the Sub Modify menu.
Adjustment
Proportion of diamond dust
pattern in mix
Particle width
Particle height
Rate of generation of particles
Setting values
0.00 to 100.00
0.00 to 100.00
0.00 to 100.00
0.00 to 100.00