Transition Types - Sony MVS-8000 User Manual

Example 1: When the independent key transition [AUTO TRANS]
Example 2: When the common transition [AUTO TRANS] button is

Transition Types

Selecting the transition type determines the way in which the transition occurs.
Carry out the type selection with the transition type selection buttons in the
transition control block of each M/E or PGM/PST bank.
For details of this operation, see "Basic Operating Procedure" (page 304).
The following are the transition types.
Mix
This is a dissolve, in which the new video progressively fades in over the
current video, with the sum of the two video outputs maintained constant. At
the mid-point of the transition (when the fader lever is in the center position),
the output of each is 50%.
This transition type can also be selected for an independent key transition. In
this case, the key either dissolves in or dissolves out similarly, with the
progress of the transition.
button is pressed later
Common transition
(wipe) start
pressed later
Independent
key transition
(mix) start
Time offset execution with the key not inserted
Independent key The transition
transition (mix) completes with the
start key deleted.
Common The transition
transition (wipe) completes with the
start key deleted.
37
Transitions