Signal Selection
You carry out signal selection with the cross-point buttons in the cross-point
control block of the M/E bank or PGM/PST bank, and the buttons in the
auxiliary bus control block.
Source name displays
Key row
DSK1
Background A row
Cross-point buttons
Basics of Signal Selection
Each of the M/E bank and auxiliary bus control block has cross-point buttons
which are identified by numbers common to the bank and block, and a signal
is assigned to each number.
These buttons are identified by numbers common to all of the banks and block,
and a signal is assigned to each number.
Key delegation buttons
DSK2
DSK3
DSK4
DME1
DME2
Background B row
Cross-point control block
XPT HOLD button
XPT
DME3
DME4
UTIL1
UTIL2
HOLD
SHIFT button
SHIFT
23
Signal Selection