Sony MVS-8000 User Manual page 460

8
Using the region selection buttons in the numeric keypad control block,
select one of the regions (User1 to User8) to which the frame memory
output signals have been assigned.
9
Carry out either of the following.
• To clear the effect register selected in step 4, and create a new effect:
press [Create Key Frame].
• To add to the end of the effect register selected in step 4, press [Append
Key Frame].
A confirmation message for creating the effect appears.
If there is an inappropriate condition for creating the effect, an error
message appears.
For details of error messages, see "Error Messages" in the Appendix
(Volume 2).
10
Press [OK].
This creates the effect in the selected user region register.
To cancel creating the effect
Press [Cancel].
Notes
• The effect is built with the selected files, in increasing order of the last three
characters of the file name. If you do not want to include some of these files
in the effect, first delete or rename them.
• A maximum of 99 keyframes can be included in a single effect.
Recalling a sequence of still images
Run the effect created by the foregoing procedure.
The procedure for doing this is the same as for any other effect.
For details, see "Executing Effects" in Chapter 13 (Volume 2).
459
Still Image Operations