Side Flags
Overview
The term "side flags" refers to the areas to left and right of an image with aspect
ratio 4:3 embedded within a 16:9 frame, when these areas are filled with a
separate image selected from the utility 1 bus. (See following figure.)
You can adjust the width of the side flag area.
Image to fill the side flag
areas (selected from utility 1
bus)
Note
The side flag function is only supported on the MVS-8000A/8000G.
Side Flag Settings
To use the side flags, the following settings are required.
Turn the side flag
function on
Side flag area
Input source with aspect ratio
Side flag area
Side Flags
97