Sony MVS-8000 User Manual page 440

Frame memory
selection area
3Target FM
selection buttons
a Auto store status display
Depending on the setup settings, this appears when the auto store function is
enabled.
b Display of available image capacity
This shows the remaining number of frames. When no more frames can be
stored, in pair mode "1" or "0" appears in red, and in single mode "0" appears
in red.
The lower figure shows the remaining number of frames that can be used as
extended clips.
1 Auto store status display
2 Display of available image capacity
4 Pair selection button
6 File selection area
Frame Memory menu
5 Pair button
7Frame
memory
folder
selection
area
8Direct
Recall
button
Still Image Operations
439