Video Process Settings - Sony MVS-8000 User Manual

Video Process Settings

This section describes operations on the M/E-1 and PGM/PST background A
and B buses, and utility buses 1 and 2.
For these operations, use the Misc >Video Process menu in the respective
operating bank.
For video process settings on other buses, see the following.
• Settings for a particular input signal: "Signal input settings" in Chapter 16
(Volume 2)
• Key fill bus settings: "Video Processing" (page 357)
• Settings for frame memory source buses 1 and 2: "Setting video processing"
(page 446)
• Settings for Aux 1 to 48 buses: "Making video process settings for an AUX
bus" (page 503)
• Overview of video process: "Video Process" (page 102)
This section describes an example on the background A bus of the M/E-1 bank.
For the background B bus or utility bus 1 or 2, make the adjustment with a
similar procedure.
Making video process settings for each bus
1
In the menu control block, press the top menu selection button [M/E1] and
select VF7 'Misc' and HF2 'Video Process.'
2
In the <Bkgd-A> group, press [Video Process], turning it on.
3
Adjust the following parameters.
Knob
1
2
3
4
5
To return the parameter settings to the defaults
Press [Unity] in the <Bkgd-A> group.
Parameter Adjustment
Video Gain Video signal gain
Y Gain Luminance signal gain
C Gain Chrominance signal gain
Hue Delay Hue delay
Black Level Black level
Setting values
–200.00 to +200.00
–200.00 to +200.00
–200.00 to +200.00
–180.00 to +180.00
–7.31 to +109.59

Video Process Settings

505