Transition mode "Compress"
The change in the image when the transition mode is set to "Compress" is as
follows, in comparison to the case of "Picture-in-picture."
• Example of the image change in the transition mode "Picture-in-
picture" (one-channel mode)
• Example of the image change in the transition mode "Compress"
Transition mode "frame in-out"
In this mode, when the first transition has completed, you can move the image
with the positioner in both horizontal and vertical directions, but the image
position at the transition start point and end point does not change.
The description is of an example of creating an effect such as the following.
72
DME Wipes
First stroke
First stroke
First transition
Transition start
completion point
Effect execution
Second stroke
Second stroke
Transition end
Image created
by interpolation
Background A
Background B