Sony MVS-8000 User Manual page 366

a) In the "4H mode" and when [Fine Key] (page 347) is on, the setting value range is 0 to 4.
To adjust the edge fill color
When [BDR] is selected, the [MORE] button lights amber. Pressing the
[MORE] button to turn it green then allows you to adjust the edge fill color
parameters with the knobs.
Knob
1
2
3
4
Setting the drop border or shadow parameters
When the [DROP BDR] or [SHDW] button is lit green, the parameter settings
differ between the "key drop OFF" and "key drop ON" modes (see page 50) as
shown below. Switching between these two modes is made by turning the
[KEY DROP] button on or off.
• "Key drop OFF" mode
Knob
1
2
4
a) In the "4H mode" and when [Fine Key] (page 347) is on, the setting value range is 0 to 4.
• "Key drop ON" mode
Knob
1
2
4
a) In the "4H mode" and when [Fine Key] (page 347) is on, the setting value range is 0 to 4.
To adjust the edge fill color
When [DROP BDR] or [SHDW] is selected, the [MORE] button lights amber.
Pressing the [MORE] button to turn it green then allows you to adjust the edge
fill color parameters with the knobs.
Knob
1
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Hue Hue
Density Density
Parameter Adjustment
Width Width
Position Position
Density Density
Parameter Adjustment
Width Width
Position Position
Density Density
Parameter Adjustment
Luminance Luminance
Setting values
0 to 100
0 to 100
359 to 0
0 to 100
Setting values
0 to 8
359 to 180
0 to 100
Setting values
0 to 100
Key Setting Operations With the Key Control Block
a)
Setting values
a)
0 to 8
359 to 0
0 to 100
365