Bank
Auxiliary
bus control
block
a) To turn on the [DME1] to [DME4] buttons requires one of the [KEY1] to [KEY4] and [DSK1]
to [DKS4] buttons to be on.
Signal Assignment and Selection
Assigning signals to buttons
Each cross-point button has a button number, to which you assign a signal.
In addition to the signals input to the PRIMARY INPUTS 1 to 80 connectors
(1 to 34 connectors for the DVS-9000SF) on the rear panel of the switcher, you
can also select signals generated within the switcher.
Bus name
Cross-point
button row
AUX1 to AUX48 buses The key row of
the bank selected
MONITOR 1 to
with the bank
MONITOR 8 buses
selection buttons
in the auxiliary
Frame memory source
bus control block
1 and frame memory
source 2 buses
DME 1 to DME 4
video buses
DME 1 to DME 4 key
buses
Edit preview bus
M/E-1 UTILITY 1 and
M/E-1 UTILITY 2
buses
P/P UTILITY 1 and P/
P UTILITY 2 buses
M/E-1 Key 1 fill to M/
E-1 Key 4 fill buses
M/E-1 Key 1 source to
M/E-1 Key 4 source
buses
DSK 1 fill to DSK 4 fill
buses
DSK 1 source to DSK
4 source buses
M/E-1 external DME
bus
P/P external DME bus
DME UTILITY 1 and
DME UTILITY 2 buses
Delegation operation
Turn on the appropriate
buttons in accordance with
the signal assignment made
in the Setup menu.
Signal Selection
25