Key Edge Modifications - Sony MVS-8000 User Manual

Key Edge Modifications

To modify the key edge of key 1 on the M/E-1 bank, use the following
procedure.
1
2
3
344
Key Setting Operations Using Menus
In the M/E-1 >Key1 menu, select HF2 'Edge.'
The Edge menu appears.
Select the edge type in the <Edge> group.
For an overview of the key edge modifications, see "Edge modifiers"
(page 48).
Normal: unadorned edge
Border: edge with border applied
Drop Border: edge with drop border applied
Shadow: edge with shadow applied
Outline: edge used as outline
Emboss: embossing effect applied to edge
If you select [Normal], skip to step 7.
Set the border width and other parameters.
When border or outline is selected: The setting parameters depend on
the key type and whether the separate edge function is enabled or not.
To enable the separate edge function, press [Separate Edge], setting it
on.
• Separate edge off
Knob Parameter
1 Width
3 Density
a) In the "4H mode" and when [Fine Key] (page 347) is on, the setting value range is 0.00
to 4.00.
b) When a wipe pattern key or key wipe pattern key is selected as the key type
• Separate edge on
The left, right, top, and bottom border or outline widths can be adjusted
Adjustment
Width
Density
Setting values
a)
0.00 to 8.00
b)
(0.00 to 100.00)
0.00 to 100.00