Displays - Brainlab Buzz Navigation System And Technical User Manual

Displays

2.2 Displays
General Information
The 42" Display (On-Wall / In-Wall) and CM Display enables interaction with Brainlab software
applications.
Viewing options vary depending on the software application and user preferences. For more
information see the relevant Software User Guide.
The display is highly precise and fragile electrical equipment. Handle it carefully.
When the system is running, the displays are always on and can be used.
Touch Display Use
Regardless of the number of touch displays connected to the Buzz Navigation (Ceiling-
Mounted) only one interaction can be performed and is recognized at a time.
Control
Optionally, displays can be switched off/on separately (e.g., through a room control for MR scans).
Positioning
Position ceiling-mounted display so as to not interfere with surgery or movement of the OR staff.
Not for Diagnostic Use
Warning
The 42" Display and the CM Display do not comply with DIN EN 6868 and are not intended
for diagnostic use.
22 System and Technical User Guide Rev. 1.2 Buzz Navigation (Ceiling-Mounted) Ver. 1.0