Brainlab Buzz Navigation System And Technical User Manual page 49

SYSTEM OVERVIEW
How to Turn the Buzz Navigation (Ceiling-Mounted) System Off
Step
1.
2.
All additional Touch Displays, the CM Display and the CM Camera are switched off automatically.
When the system has finished shutting down, the power LED on the power button switches off.
NOTE: After the system has shut down, the system is in stand by mode.
NOTE: The mains power disconnection of Buzz Navigation (Ceiling-Mounted) depends on the
installation setup:
• If the power plug is accessible, unplug the power plug from the socket.
• If an external mains switch is installed, turn off the mains switch.
• If the power plug is not accessible and no mains switch is installed, please contact Brainlab
support to disconnect the power plug.
How to Turn Additional 42" Displays On
This procedure applies to all installation variants of the additional 42" Display.
Step
Press the power button ① on the feature panel of the main display. The additional 42" Display is
also powered.
How to Turn Additional 42" Display Off
This procedure applies to all installation variants of the additional 42" Display.
After the MCU is completely shut down, the additional 42" Display switches off automatically using
relay control.
NOTE: The mains power disconnection of Buzz Navigation (Ceiling-Mounted) depends on the
installation setup:
• If the power plug is accessible, unplug the power plug from the socket.
• If an external mains switch is installed, turn of the mains switch.
System and Technical User Guide Rev. 1.2 Buzz Navigation (Ceiling-Mounted) Ver. 1.0
Select either:
• The Exit button in the software (preferred), or
• Press the Power button on the Feature Panel ①.
Select Shut down in the software.
①
Figure 19
49