Control Panel Messages - Xerox DocuPrint N24 System Administrator Manual

Control Panel
Messages
Table 6.2 Control Panel messages and corrective actions
Message
†
0 00 1 -ESS
† Appears in the upper left
corner of the display.
†
0 00 3 -ESS
† Appears in the upper left
corner of the display.
†
0 00 4 -BASE RAM
† Appears in the upper left
corner of the display.
†
0 00 5 -BASE ROM
† Appears in the upper left
corner of the display.
Listed in Table 6.2 are Control Panel messages that
either:
• Cause the printer to stop printing.
• Require the user to call for service.
Also included in Table 6.2 are common, non-error
messages you are likely to see. The messages are listed in
alphabetical order.
If you have a finisher, the finisher control messages are all on
the finisher documentation on your product CD.
Description/Corrective Action
A fault condition has occurred.
ACTION: Power OFF and power ON the printer. If this code appears again at
power ON, contact your dealer or Xerox.
A fault condition has occurred.
ACTION: Power OFF and power ON the printer. If this code appears again at
power ON, contact your dealer or Xerox.
A fault condition has occurred.
ACTION: Power OFF and power ON the printer. If this code appears again at
power ON, contact your dealer or Xerox.
A fault condition has occurred.
ACTION: Power OFF and power ON the printer. If this code appears again at
power ON, contact your dealer or Xerox.
Click for Updated Information
Chapter 6: Troubleshooting

Control Panel Messages

Table 6.2 Page 1 of 21
6-5