Menu Indicators
Table 3.3
Indicators found in the Control Panel Menu systems
Indicator
=
This indicator only appears after options which take a specific
setting—it indicates that a value or setting follows the option.
The example at the right tells you that Language is an option that
takes a specific setting. One setting for the Language option is
Français. Another setting is English. (The list of available settings is
displayed one setting at a time on the bottom line of the display as
you press Value Up
*
This indicator identifies the current value setting.
The example at the right tells you that Language is currently set to
English.
Pressing Value Up
possible values.
Control Panel Locks
Two menu indicators (= and *) are used to furnish
information about menus and settings. The purpose of
each indicator is described in Table 3.3 below.
Purpose
or Value Down
.)
or Value Down
scrolls through the
Some of the menus in the Control Panel can be locked to
prevent unauthorized access to critical system parameters
(refer to CentreWare DP documentation). If you scroll to a
locked menu, pressing either Item key causes the menu
name to appear on the top line of the display and "Menu
Locked" to appear on the second line.
Chapter 3: Using the Control Panel
Navigating the Menu System
Example
Lang uag e
Fran çai s
Lang uag e
Engl ish
=
=
*
3-11