Xerox DocuPrint N24 System Administrator Manual page 200

Control Panel Messages
Table 6.2 Control Panel messages and corrective actions (continued)
Message
†
1 00 0 -IOT
† Appears in the upper left
corner of the display.
†
2 00 0 -XIE RAM
† Appears in the upper left
corner of the display.
†
4 00 0 -NIC
† Appears in the upper left
corner of the display.
A ll J ob s
D el et e
A ll J ob s
P ri nt
Any Tray
<Size> <Type>
C an ce li ng Jo b. ..
6-8 DocuPrint N24, N32, and N40 System Administrator Guide
Description/Corrective Action
A fault condition has occurred.
ACTION: Power OFF and power ON the printer. If this code appears again at
power ON, contact your dealer or Xerox.
A fault condition has occurred.
ACTION: Power OFF and power ON the printer. If this code appears again at
power ON, contact your dealer or Xerox.
A fault condition has occurred.
ACTION: Power OFF and power ON the printer. If this code appears again at
power ON, contact your dealer or Xerox.
This message appears for secure printing. You can delete all secure jobs in your
queue.
ACTION: Press Value Up
and Print. Select
This message appears for secure printing. You can print all secure jobs in your
queue.
ACTION: Press Value Up
and Delete all jobs. Select
Enter
.
The job requires a specific type of paper which can be loaded into any tray. The
bottom line contains the paper size (e.g., Letter (8.5x11), A3 (297x420), A4
(210x297) and paper type (e.g., Plain, Preprinted, Letterhead, etc.). ACTION:
Add the requested paper size and paper type to any tray.
A job is being canceled.
ACTION: None.
or Value Down to toggle between
Delete to delete all jobs and press Enter
or Value Down to toggle between
Print to print all jobs and press
Delete
.
Print
Table 6.2 Page 4 of 21