Using The 100 Envelope Feeder - Xerox DocuPrint N24 System Administrator Manual

Using the
100 Envelope Feeder
1
Prepare a stack of envelopes, making
sure all flaps are closed and the
envelopes are not stuck together.
The 100 Envelope Feeder is an optional paper handling
device available for the DocuPrint N40. Refer to Table 2.1
on page 2-4 for acceptable envelope sizes.
2
Lift the envelope stopper and insert the
stack with the flap-side up and the long
edges leading into the printer.
3
Slide the side guide so that it lightly
touches the edges of the envelope stack.
Loading Paper
To avoid paper jams, do not stack
envelopes above the paper limit
mark, and do not attempt to add
envelopes while printing.
Chapter 2: Paper Handling 2-19