Xerox DocuPrint N24 System Administrator Manual page 126

Serial Menu
Table 3.12 Serial Menu functions
Menu Item and Function
Port Enable
Enable or disable the serial port. The
available values are:
On*
Off
Port Timeout
Set the time for determining when to
end an incomplete print job and poll
the next port in the polling sequence.
The available values are:
5 - 300 seconds (30*)
This item also causes an implicit job end
such as Control D in PostScript or
<ESC> E in PCL, and invokes the
emulation functions associated with
this action (e.g., formfeed, reset, etc.).
The time changes incrementally by 1
second each time either Value Up
or Value Down is pressed. Holding
down Value Up or Value
Down causes continuous scrolling
through the values.
3-48 DocuPrint N24, N32, and N40 System Administrator Guide
Keystrokes
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item
Down until you see:
3. Press Value Up or Value
Down until you see:
4. Press Enter . You will see:
5. Press On Line . You will see:
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item
Down until you see:
3. Press Value Up or Value
Down until you see:
4. Press Enter . You will see:
5. Press On Line . You will see:
Display
Menu s
Seri al Men u
Seri al Men u
Port En abl e
Port En abl e
New Value
Seri al Men u
Port En abl e
Read y
Menu s
Seri al Men u
Seri al Men u
Port Ti meo ut
Port Ti meo ut
New Value
Seri al Men u
Port Ti meo ut
Read y
Table 3.11 Page 1 of 2
=
=