Installing the
Printer
Before You Begin
Space Requirements
Top View
1
60.5 inches (1540 mm)
2
36 inches (920 mm)
3
4 inches (100 mm)
4
12 inches (305 mm)
5
36.5 inches (925 mm)
6
72 inches (1830 mm)
This section describes the procedures for unpacking and
setting up the printer in its base configuration. If you have
additional options to install, refer to Appendix
C: Installing and Removing Printer Options for specific
instructions for each option.
Be sure to read this entire section before continuing on to
the installation steps. This section contains important
information concerning your safety and the safety of the
printer.
For easy operation, maintenance and replacing of
consumables, you should select a location for the printer
that leaves the minimum clearances around the printer as
shown in Figure 1.4 for a base configuration, and in
Figure 1.5 on page 1-20 when options are installed.
Figure 1.4
Space requirements for a base configuration
Installing the Printer
Chapter 1: Getting Started
1-19