9
Slide the cover open to expose the three
feedrolls for Tray 5.
Installing the Maintenance Kit
10
Replace the three feedrolls. (Refer to
Figure B.1 on page B-17 if necessary.)
11
Replace and close all paper input trays.
12
Reattach the power cord to the printer.
13
To reset the Maintenance Kit counter
• Hold down keys
same time and power ON the printer.
• Keep holding down keys
until the message *IOT?* appears.
• Then within five seconds after the message
appears, hold down keys
the same time until the next message Reset
Completed - Please Reboot appears. This
confirms the counter reset.
Appendix B: Maintaining the Printer
:
and
at the
and
and
at
B-21