Table 3.7
Tray Menu functions (continued)
Menu Item and Function
Tray Sequence
Set the sequence of trays used by the
printer when tray switching is required.
The available values are:
Off
MBF-1
†
MBF-1-2
MBF-4-5
MBF-4-5-1
MBF-4-5-1-2
††
MBF-4-5-1-2-3
†††
1-2
1-2-3
4-5-1
4-5-1-2
††††
4-5-1-2-3
4-1
4-1-2
4-1-2-3
† With Bypass Feeder and no 2,500 Sheet Feeder.
†† With Bypass Feeder and 2,500 Sheet Feeder.
††† With Envelope Feeder and no 2,500 Sheet Feeder.
†††† With Envelope Feeder and 2,500 Sheet Feeder
The first tray of a sequence is used until
it runs out of paper, at which time the
next tray in the sequence is used (if it
has the correct paper size and type).
See the section "Automatic Tray
Switching" (page 2-20) for rules and
examples of usage.
Keystrokes
1. Press Menu Up
or Menu
Down
until you see:
2. Press Item Up
or Item
Down
until you see:
3. Press Value Up
or Value
Down
until you see:
4. Press Enter
. You will see:
5. Press On Line
. You will see:
Chapter 3: Using the Control Panel
Tray Menu
Display
Menu s
Tray Me nu
Tray Me nu
Tray Se que nce
Tray Se que nce
New Value
Tray Me nu
Tray Se que nce
Read y
Table 3.7 Page 5 of 5
=
3-27