Xerox DocuPrint N24 System Administrator Manual page 327

3
Loosen the thumbscrews and pull out the
controller board. Set it on a flat surface.
5
Remove the NIC by gently lifting it away
from the 96 pin receptacle and pulling it
away from the controller board.
4
Use the screw driver/nut driver to
remove the two screws that hold the NIC
in place as illustrated. Set the screws
aside.
6
Reinstall the cover plate on the controller
board using the two screws.
Appendix C: Installing and Removing Printer Options
Xerox Network Interface Card (XNIC)
C-57