Downloading Fonts And Macros - Xerox DocuPrint N24 System Administrator Manual

Downloading
Fonts and
Macros
Chapter 5: Using the Hard Disk Drive / Downloading Fonts and Jobs
Xerox DocuPrint N40 printer drivers provide you with the
ability to download fonts and PCL macros to the printer.
Fonts and macros can be downloaded to printer memory
or to the optional hard drive via drivers.
• To download fonts you must first install the
appropriate DocuPrint N40 Windows 3.1, Windows 95,
Macintosh, Windows NT, or UNIX drivers. To
download macros, you must install the DocuPrint N40
Windows PCL driver.
• Fonts downloaded to the Hard Disk Drive are stored in
the PCL Fonts and PS Fonts directories. Macros
downloaded to the hard drive are stored in the PCL
Macros directory. Fonts and macros stored in these
directories remain there until you delete them. They
are not cleared from the hard disk when the printer is
powered off. You can only delete a macro from the
hard disk if you know the name of the macro. Since
you cannot print a list of macros as you can for fonts, it
is important to keep a record of all downloaded
macros. Then, use the PJL FSDELETE command to
delete fonts and macros.
• "Temporary" fonts/macros downloaded to printer
memory on a job per job basis are cleared from the
printer's memory after each job.
• "Permanent" fonts downloaded to printer memory are
cleared from memory whenever the printer is powered
off. When the printer switches PDLs, its automatic
State Saving feature saves all fonts and macros.
In addition to downloading through drivers, the
DocuPrint N40 will support downloading of fonts and
macros to its disk by the use of the PJL command
FSDOWNLOAD. These files may be deleted from the
DocuPrint N40 disk by the PJL command FSDELETE.

Downloading Fonts and Macros

5-3