Xerox DocuPrint N24 System Administrator Manual page 150

Network laser printer
Hide thumbs Also See for DocuPrint N24:
Table of Contents

Advertisement

Token Ring Menu
Table 3.14 Token Ring Menu functions (continued)
Menu Item and Function
Subnet Mask
Set the four byte Subnet Mask address.
The available values are:
xxx.xxx.xxx.xxx
Where xxx=000 to 255
This item only appears if IP Address Res.
is set to
Control Panel
For this item (after Step 3), Item
Up
moves the cursor to the right
through the displayed Subnet Mask
address and Item Down
the cursor to the left. This allows you to
change characters within the string
rather than having to reenter the entire
string.
With the cursor displayed under a
character, Value Up
increments
the value of that character and Value
Down
decrements the value.
3-72
DocuPrint N24, N32, and N40 System Administrator Guide
Keystrokes
1. Press Menu Up
Down
2. Press Item Up
Down
3. Press Value Up
.
Down
4. Press Value Up
Down
of the character above the
moves
cursor. The value is incremented
or decremented by 1 each time
the key is pressed. Holding
down Value Up
Down
scrolling through the values.
5. To change other characters in
the Subnet Mask address, press
Item Up
to scroll right or left respectively
through the character string,
then press Value Up
Value Down
value of the character above the
cursor (as in Step 4).
6. When you have completed
setting the Subnet Mask
address, press Enter
will see:
7. Press On Line
or Menu
Menu s
until you see:
Toke n R ing Me nu
or Item
Toke n R ing Me nu
until you see:
Subn et Mas k
or Value
Subn et Mas k
. You will see:
xxx.xxx.xxx.xxx
or Value
Subn et Mas k
to change the value
xxx.xxx.xxx.xxx
or Value
causes continuous
Subn et Mas k
xxx.xxx.xxx.xxx
or Item Down
or
to change the
Toke n R ing Me nu
Subn et Mas k
. You
. You will see:
Read y
Display
=
=
=
Table 3.13 Page 8 of 12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docuprint n40Docuprint n32

Table of Contents