Xerox DocuPrint N24 System Administrator Manual page 152

Token Ring Menu
Table 3.14 Token Ring Menu functions (continued)
Menu Item and Function
Port Timeout
Set the time for determining when to
end an incomplete print job and poll
the next port in the polling sequence.
The available values are:
5 - 300 seconds (60*)
This item also causes an implicit job end
such as Control D in PostScript or
<ESC> E in PCL, and invokes the
emulation functions associated with
this action (e.g., form feed, reset, etc.).
The time changes incrementally by 1
second each time either Value Up
or Value Down is pressed. Holding
down Value Up or Value
Down causes continuous scrolling
through the values.
Source Routing
Set the source routing option. The
available values are:
Off
On*
3-74 DocuPrint N24, N32, and N40 System Administrator Guide
Keystrokes
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item
Down until you see:
3. Press Value Up or Value
Down until you see:
4. Press Enter . You will see:
5. Press On Line . You will see:
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item
Down until you see:
3. Press Value Up or Value
Down
until you see:
4. Press Enter
. You will see:
5. Press On Line . You will see:
Display
Menu s
Toke n R ing Me nu
Toke n R ing Me nu
Port Ti meo ut
Port Ti meo ut
New Value
Toke n R ing Me nu
Port Ti meo ut
Read y
Menu s
Toke n R ing Me nu
Toke n R ing Me nu
Sour ce Rou tin g
Sour ce Rou tin g
New Value
Toke n R ing Me nu
Sour ce Rou tin g
Read y
Table 3.13 Page 10 of 12
=