Xerox DocuPrint N24 System Administrator Manual page 389

<ESC>%-12345X @PJL<CR><LF>
@PJL FSDOWNLOAD FORMAT:BINARY NAME ="0:\pcl\fonts\font1" SIZE=XX<CR><LF>
<binary data><ESC>%-12345X
<ESC>&n6W<HEX'00'>font2<CR,LF>
<ESC>&n6W<HEX'01'>font1<CR,LF>
<ESC>&n6W<HEX'02'>font1<CR,LF>
X e r o x D o c uP r in t N 2 4 / N 3 2 / N 4 0
The following is a sequence of commands that can be sent to the
printer to download a font to the disk.
In this example:
• <ESC>%-12345X is the PJL UEL command which starts this
sequence.
• @PJL<CR><LF> is the mandatory PJL command following the UEL
command.
• @PJL FSDOWNLOAD... downloads a font named "font1" that is
"XX" bytes in size.
• <ESC>%-12345X is the UEL command which ends this sequence.
• Invoking this font requires the following PCL sequence:
Notes:
• The case of the string ID must be the same as the case of the
fontname in the FSDOWNLOAD command.
• The byte count ("6" in the above example) must equal the string
ID byte count plus 1.
D o w n lo a di ng Fo n t s a nd M a c r os
Sets the current font ID to the given string
ID "font2"
Associates the current font ID with the
string ID "font1"
Selects the font referred to as "font1" for
the primary font
D o c um e n t at i o n U p d at e 2 9