Xerox DocuPrint N24 System Administrator Manual page 374

Co n t r o l P an e l a n d M e n u
1 4 D o c u me n t a t io n U p d at e
System menu updates (Continued)
Menu item and function
Print PS Errors
PostScript setting that controls the use of the
built in error handler or debugger.
Note: This item was moved from the
PostScript Menu.
Output Timeout
Determine whether the printer selects an
alternate output bin when the original
selected bin is full. Output Timeout can be set
to "ON" or "OFF" for switching bins.
• When the value is set to "ON", and the
selected bin becomes full, the printer
immediately starts sending output to the
next available bin.
• When the value is set to "OFF", and the
selected bin becomes full, the printer waits
until the specified bin is emptied. It then
resumes sending documents to the
specified bin.
Note: This item existed before. The values
have changed from numerical values.
Staple Mode
Select the default staple position.
Note: This item appears only when the
Finisher is installed.
Values
Off*
On
Off
On*
Off*
Position 1 (Front)
Position 2 (Rear)
Dual (Two in middle)
X e r o x D o c uP r in t N 24 / N 3 2 / N 4 0